020-2445 5089

contact@parasproaudio.com

P.AUDIO C12-500MB Ferrite Magnet Die-cast Chassis Driver

7,500.00

Out of stock

Notify Me when back in stock

The P.AUDIO C12-500MB Ferrite Magnet Die-cast Chassis Driver. The P.AUDIO C12-500MB is a high performance wide bandwidth transducer. The C12-500MB is an upgraded design that features many of P Audio is new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels in the mid band and upper mid frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.

C12-500MB Features:

  • 9” Large Format Voice Coil
  • 2000 Watts Peak Power Handling
  • Active Balanced Cooling
  • Ferrite Magnetics
  • Precision Rectangular Ribbon Wire Geometry
  • Die Cast Aluminium Chassis
SKU: PRS-C12-500MB Categories: , , Tags: ,

The P Audio C12-500MB is a high performance wide bandwidth transducer. The C12-500MB is an upgraded design that features many of P Audio is new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels in the mid band and upper mid frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio.

The C12-500MB has been optimized for use in two way or three way sound reinforcement systems. The transducer is also ideal as a mid bass driver for ultra high performance system designs and has an operating bandwidth of 60Hz to 3000Hz. The C12-500MB features a very large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available.

The C12-500MB utilizes P Audio is Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio is ribbon rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminium design that insures a very high degree of structural integrity.

C12 500MB spec
C12 500MB freq

The P.AUDIO C12-500MB Ferrite Magnet Die-cast Chassis Driver. The C12-500MB has been optimized for use in two way or three way sound reinforcement systems. The transducer is also ideal as a mid bass driver for ultra high performance system designs and has an operating bandwidth of 60Hz to 3000Hz. The C12-500MB features a very large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available.

The C12-500MB utilizes P Audio is Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio is ribbon rectangular wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminium design that insures a very high degree of structural integrity.

Additional information

Brand

SIZE

Manufactured in

Reviews

There are no reviews yet.

Be the first to review “P.AUDIO C12-500MB Ferrite Magnet Die-cast Chassis Driver”

Your email address will not be published. Required fields are marked *