020-2445 5089

contact@parasproaudio.com

55% OFF

Marani DPA260P Digital Speaker Management System

Original price was: ₹86,500.00.Current price is: ₹38,500.00.

Out of stock

Notify Me when back in stock

The Marani DPA260P Digital Speaker Management System is a cost-effective 2-IN/6-OUT speaker management system. Designed to be catered for any crossover configuration, it provides the suitable processing and control for live application use. It offers 2 analog inputs, and 6 analog outputs, managed by a powerful MARANI®  DSP Engine, in addition to 24 Bit AD/DA Converters. Each input channel provides a choice of EQ with a 11-band Parametric EQ, gain control, noise gate function, RMS Compressor, Internal White/Pink Noise Generator and configurable delay. Each output offers up to 5-band of parametric equalization into the crossover filters which themselves provide slopes from 6dB/Octave up to 48dB/Octave. Each output path also features peak limiter and driver alignment delay.

Marani DPA260P Key Features: –

Outstanding Performance:

  • Excellent sonic performance with 24bit high end converters coupled with 48kHz sample rate
  • 2 inputs, 6 outputs with full matrix mixing

Top-grade DSP Engine:

  • 11 band parametric equalization per input channel
  • 7 band parametric equalization per output channel
  • Each band can be switched to Bell, Low/High Shelving with variable Q response
  • Crossover filters with slopes from 6dB/Octave up to 48dB/Octave including Butterworth, Bessel, Linkwitz-Riley
  • Each output features a dynamic range controller composed of a Peak Limiter.
  • Adjustable Delay time up to 900 ms for every input channel, and up to 340 ms for every output channel
  • Phase correction per output channel

Direct PC/Network Connection

  • Rear panel USB connector for direct PC communications
  • RS485 connection for system setup, monitoring and control via fully manageable remote PC software

Control

  • Front panel interactive LCD display for local access and configuration
  • Front panel 7-LED level meter indicators per channel
  • Simultaneous control up to 32 units via PC software
  • Up to 48 storable user presets
  • Security Lockout

The DPA260P supports a full matrix mixing mode where inputs may be routed/mixed in any ratio to any output. For remote configuration and control the DPA260P can be connected via USB or RS485 connections. The control remote PC software allows simultaneous control up to 32 units, setting all parameters and showing real time levels.

 

BrandMarani
ModelDPA260P
TypeDigital Speaker Management System
Analog Input2 x XLR electronically balanced
Analog Output6 x XLR electronically balanced
AD & DA Converters24bit 48kHz
Minimun Load150 ohm
THD+N0.005% at 1kHz 0dBu
0.01% at 1kHz 16dBu
S/N>106 dBA
Frequency Response20Hz – 20kHz; -0.5dB
DSP EngineMARANI®  DSP
DSP Resolution24×32 bit for filtering process
96 bits resolution on intermediate computation results
Parametric Equalization11 filters per input selected as Bell or Shelving
7 filters per output selected as Bell or Shelving
Filter TypeBell, Shelving
Filter GainFrom -12dB up to +12dB by 0.5dB resolution steps
Center FrequencySelectable with a 1/24th of octave resolution step from 20Hz up to 20kHz
Filter Q/BWQ from 0.4 up to 12 by 0.1 resolution steps
Crossover Section HPF/LPFButterworth 6/12/18/24 dB per octave
Bessel 12/24 dB per octave
Linkwitz-Riley 12/24/36/48 dB per octave
Internal Noise GeneratorWhite/Pink Noise, level from -30dBu to 0dBu
Input Noise GateThreshold from -90 dBu up to -60 dBu
RMS CompressorThreshold from -14 dBu up to +16dBu
Ratio: 2:1~100:1; Knee: 0%~100%
Attack time from 5ms up to 200ms
Release time from 0.1 sec up to 3 sec
Delay900 ms for every input channel and 340 ms for every output channel
Ground Noise-88 dBu
Device Presets48 User Presets
Front Panel2x24 character LCD display with green LED backlight
7-LED meter per input channel -20dBu to +15dBu, clip
7-LED meter per output channel -15dBu to +15dBu, clip or limiter mode
Blue LED (Edit) and Red LED (Mute) per channel
NAV/PM1 Rotary encoder push button switch
PM2, PM3, ENTER, ESC, UTILITY push button switches
EDIT/MUTE push button per channel
USB type B connector
Rear Panel2 x XLR female connector (Input)
6 x XLR male connector (Output)
1 x XLR female connector for RS485 (Input)
1 x XLR male connector for RS485 (Output)
2 x Ground-lift toggle switch
IEC C13 16A connector; Power on/off switch
Main AC90-240VAC (50/60Hz) – 40W
Dimensions19”x 1.75”x 9” (483x44x229mm) 1RU
Weight, Net / Shipping6.61 lbs (3.0 Kg) / 7.71 lb (3.5 Kg)

Additional information

Brand

Warranty

Reviews

There are no reviews yet.

Be the first to review “Marani DPA260P Digital Speaker Management System”

Your email address will not be published. Required fields are marked *