020-2445 5089

contact@parasproaudio.com

64% OFF

DBX DriveRack VENU360 Loudspeaker Management System

Original price was: ₹151,388.00.Current price is: ₹54,000.00.

Only 1 left in stock

The DBX DriveRack VENU360 Loudspeaker Management System. The dbx DriveRack VENU360 is a digital signal processor for the optimisation of PA systems. It is an indispensable tool for concerts and live productions. The DriveRack VENU360 is very easy to use. With the installation assistant you can use the entire performance spectrum of the DriveRack. This is how you step by step tune all loudspeakers optimally. There are presets for many speakers and amplifiers. The fully parametric AutoEQ function helps you adjust the speaker system to the room.

DBX 360 Features:

INPUT PROCESSING

  • dbx Compression
  • AFS™ (Advanced Feedback Suppression)
  • 31-Band Graphic EQ
  • 12-Band Parametric EQ (with narrow notch capabilities)
  • Subharmonic Synthesis
  • Backline Delay
  • Noise Gate

OUTPUT PROCESSING

  • Crossover (supports full range up to mono 6-way systems)
  • 12-Band AutoEQs (8 AutoEQ bands, 4 User bands)
  • dbx Compression
  • Automatic Gain Control
  • Subharmonic Synthesis
  • Noise Gate
  • Tower Delays (up to 1000ms per output)
  • 8-Band Parametric EQs (used for speaker tunings)
  • dbx Limiting
  • Driver Alignment Delays
BrandDBX
ModelDriveRack VENU360
TypeDigital Sound Management
Input(3) analog line inputs/(2) AES digital inputs (shared connectors), (1) RTA mic input
Input Connectors(3) female XLRs (2 selectable between analog/AES digital audio formats), (1) female XLR RTA mic input
Input TypeElectronically balanced/RF filtered
Input Impedance> 30 kΩ, balanced line to line
Max Input Level (line inputs)> +28 dBu, balanced, ≤1% THD
CMRR> 50 dB @ 1 kHz
RTA Mic Preamp Phantom Power+48 VDC
Output(6) Line Outputs
Output ConnectorsMale XLR
Output TypeElectronically balanced, RF filtered
Output Impedance120 Ω, balanced line to line
Max Output Level+22 dBu, balanced, ≤1% THD
Alignment DelayUp to 1000 ms per output channel
A/D Converter24-bit with dbx Type IV™ Conversion System
A/D Dynamic Range117 dB A-weighted, 114 dB unweighted, 22 kHz BW
Type IV Dynamic Range129 dB with transient material, A-weighted, 22 kHz BW; 126 dB with transient material, unweighted, 22 kHz BW; 121 dB typical with program material, A-weighted, 22 kHz BW
D/A Converter24-bit
D/A Dynamic Range116 dB A-weighted, 113 dB unweighted, 22 kHz BW
Internal Processing Wordlength32-bit floating point
Supported Sample Rates48/96 kHz (32-192 kHz using sample rate conversion)
System Performance Dynamic Range114 dB A-weighted; 110 dB unweighted
THD+Noise0.0025% typical at +4 dBu, 1 kHz, 0 dB input gain
Frequency Response20 Hz – 20 kHz, +0 /- 0.5 dB
Interchannel Crosstalk< -97 dB, -105 dB typical 20-20 kHz, +4 dBu, all channels measured
LatencyAnalog input to output: 2.57 ms (48 kHz), 2.28 ms (96 kHz); Digital AES input to output: 2.31 (48 kHz), 2.15 ms (96 kHz)
Operating Voltage100-240 VAC 50/60 Hz
Power Consumption18 W
Unit Weight2.49 kg (5.48 lbs.)
Shipping Weight3.22 kg (7.10 lbs.)
Dimensions1.75” (H) x 8.0” (D) x 19” (W), 4.4cm (H) x 20.32cm (D) x 48.26cm (W)

Additional information

Brand

Warranty

Reviews

There are no reviews yet.

Be the first to review “DBX DriveRack VENU360 Loudspeaker Management System”

Your email address will not be published. Required fields are marked *